Product family

Options

Float balls with whatever fittings your assembly needs — threaded, through-tube, magnet-sealed and pressure-tested, any thread spec. Drawn-and-welded stainless steel, built to your spec. Call us with your size and thread — we usually quote the same day.

Request a Quote Call (416) 805-8132
In this family

Product lines

Every line is held in inventory for the most common sizes and threads — non-standard specs are drawn, welded and tested to order. Call to confirm stock in real time.

Stainless steel threaded float ball valve assemblies in six sizes

Threaded Float Balls

Any thread spec tapped on request — NPT, UNC, metric or legacy. The default float for valve bodies and rod assemblies.

View product
A stainless float ball with a through-tube for rod mounting

Float Balls with Through Tubes

Welded-in through tubes for ⅜″ to ¾″ rods on 5″ to 12″ balls — for rod-mounted indicators and level-arm assemblies.

View product
A stainless steel float ball with a sealed internal magnet

Magnetic Float Balls

Sealed-in magnets for non-contact level sensing — used where the switch must sit outside the tank wall.

View product
A pressure-tested stainless steel float ball at the water line

Pressure-Tested Floats

On-site pressure testing to your spec, with certification on request — for lines under steam, high head or pressurised media.

View product
Stainless steel float valve stem and lever parts — float ball on a stem, threaded valve body, stem rod and complete assemblies

Stem Lever

Stem and lever hardware that turns a float ball into a working valve — threaded bulkhead body with an O-ring seal, pivoting lever and a stem rod cut to length.

View product
Five stainless steel threaded ring fittings for float balls, shown in decreasing sizes

Rings

Threaded stainless ring fittings that screw into a float — a lifting eye for hoisting, tethering or suspending the ball on chain, cable or lanyard.

View product
Five stainless steel threaded fill plugs with O-ring seals and socket drives

Fill Plugs

Fill plugs can be added if you need to adjust the ball weight or add any liquid to the inside of the float.

View product
Specs at a glance

What you can specify on these floats

Tell us what you need on the call — we will confirm what is in stock and what we will draw and weld to spec.

  • Threads: NPT, UNC, metric, legacy — any spec tapped on request
  • Through tubes: Through-tube fittings for ⅜″, ½″, ⅝″ & ¾″ rod
  • Magnets: Sealed inside the ball — grade & orientation to spec
  • Testing: On-site pressure testing to customer spec
Get a quote
Ready when you are

Send the spec — we'll quote it on the call

Pick up the phone or send the form — typical reply within one business day, and stock checks are real-time on the call.

Request a Quote Call (416) 805-8132